YOUR COMPANY NAME HERE                                        
			    YOUR ADDRESS HERE                                          
									
  Page  1                                                                          
  Job: Web Test System           Lock: Schlage     Master: 63405               
  Key ID       Change   Bottom   Master       Descriptions                
===============================================================================
   A Master    63403                      .........................   
  AA 1       X 21643    21403    42242    Names from the Database     
  AA 2       * 21243    21203    42242    .........................   
  AA 3       * 21043    21003    42442    Or... type names in directly
  AA 4       * 21623    21403    42222    .........................   
  AA 5       X 21223    21203    42222    Or... write them in by hand 
  AA 6       * 21023    21003    42422    .........................   
  AA 7       * 21663    21403    42262    Rick's office               
  AA 8       * 21263    21203    42262    .........................   
  AA 9       X 21063    21003    42462    .........................   
  AA 10        21683    21403    42282    .........................   
  AA 11        21283    21203    42282    .........................   
  AA 12        41643    41403    22242    .........................   
  AA 13        41243    41203    22242    .........................   
  AA 14        41043    41003    22442    .........................   
  AA 15        41623    41403    22222    .........................   
  AA 16        41223    41203    22222    .........................   
  AA 17        41023    41003    22422    .........................   
  AA 18        41663    41403    22262    .........................   
  AA 19        41263    41203    22262    .........................   
  AA 20        41063    41003    22462    .........................   

  
  Change keys marked with an "X" are intentional crosses you enter in
  the Cross-Keying form (not shown here.)

  Change keys marked with an "*" are unintentional crosses, marked
  when you run the Cross-Key report.  (unintentional crosses are keys
  that you didn't plan on operating the cylinder when you cross it, but
  will.) 

  Here's the keying for cylinders you want crossed, either intentionally
  or unintentionally, this is calculated for you by the Cross-Keying
  feature.
  
               xx22x  Master pins
               xx22x  Master pins
               42222  Master pins
               21003  Bottom pins
               ------
               x = No master pins

  If you DON'T want someones key to operate this cylinder select one
  that's NOT marked.  If you DO, select one that IS marked, it's that
  simple.  There are various other ways to scatter keys that will
  cross, not shown here.